eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK FUEL LEVEL, ADD FUEL WARNING the tank. 3. After adding fuel, tighten the cap securely. 3 - 61 When adding fue l, never let the fuel over flow. This may c ause a fire. If any fuel is spilled, wi pe it up completely. Ne ver bring flames near fuel because it is highly flamm uel level with fuel gau ge (G), which i s installed in the fuel tank. eting operations, ad d fuel through f uel filler (F) to fill apacity: 1250 liters (330 US gal) apacity: 1250 liters ( REMARK hole in the cap becomes clogged, the pressure If the breather comes inside the tank will go down and the fuel may not flo w, so clean the breather hole fr om time to time.

CHECK WHEEL HUB NUTS, TIGHTE N Check for loose hub nuts, and if any are loose, tigh ten 3 or 4 times to the specified torque in the order given in the dia Tightening torq 2210 ± 245 N·m (225 ± 25 kgf·m , 1627.4 ± 180. (When threa d are not coated wit h grease) 1720 ± 196 N·m (175 ± 20 kgf·m , 1265.8 ± 144. (When threa d are coated with m olybdenum dis ulphide grease) Insert a socket wrench in a pipe, an d apply a force of 2210 N (225 kgf) at a point 1 m from the fulcrum to give a tightening torque of kgf·m). 2210 N·m (225 If any stud bolt used to install the rim is broken, rep lace all the stud bolts for that w heel.