. OPERATION OPERATION ADJUSTMENT BEFORE OPERATION ADJUSTING OPERATOR'S SEAT WARNING then Adjustment range: Seat surface approx. 2.7 ° up and down 3 - 65 Adjust the s eat position at the begin ning of each shift o r when o perators change. Adjust the s eat so that the brake ped al can be depresse d all the way with the operators back ag ainst the backr (A) Fore-and- aft adjustment Move lever (1 ) to the right, set the se at to the desired position , then release the le ver. nge: 140 mm (5.5 in) (7 stages) Adjustment ra nge: 140 mm (5.5 in) (B) Adjusting seat angle up, set the seat angle to the desired position ver.
Pull lever (2) release the le (C) Setting se Turn grip (3) at for operator's weig under the seat to adju ht st weight adjustment scale (4) to your own w Adjustment ra eight. nge: 50 to 120kg (110 to 265 lb) REMARK To make the seat softer, adjust the weight to make it lighter; to t harder, adjust the weight to make it heavier. ak make the sea t harder, adjust the w eight to make it h eavier. When traveli ng on rough road sur g operations. faces, make the seat harder harder before startin (D) Adjusting backrest angle Pull lever (5), set the backrest to th e desired position , then release the Adjustment ra nge:
28 stages (56°) (E) Seat heig ht adjustment Move lever (6 ), set the seat to the d esired position, t hen release the lever Adjustment ra nge: 50 mm (2.0 in)