eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK ELECTRIC WIRING WARNING NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa (0.3 kgf/cm 2 , 4.3 PSI) of the value in the table above. 3 - 64 If the fuses freq uently blow or i f there are t races of sh ort circuit s in t he electrical wiring, locate the cause and immediately perform repairs, or contact your Komatsu d istributor f or repairs. Keep the top su rface of the batte ry clean an d check the breather h ole i n the battery cap.

If i t is clogge d with dirt o r dust, wash the b attery cap t o clean the brea Check any sign wiring. Check als o for loose ter minals and tighten a ny loose part Check the wiring of the "battery ", "starting motor"an d "alternator"carefully , in particular Always check if t here is any ac cumulatio n of flammable material around t he battery , and remove such flammable material. Please contact y our Komatsu d istributor f or investigation and correction o f any problems found.

CHECK INFLATION PRESSURE OF TIRES Measure the infla tion pressure with a tire pressure gauge , while t he tires are cool, b efore starting work Check for damag e or wear to t he tires an d the rims Check for loose wheel hub nut s (bolts). The proper inflati on pressure is shown be Standard inflatio n pressure (fro nt wheel a nd rear w Tire size Inflation pressure !! 27.00R49 (standard) 0.69 MPa (7.00 kgf/cm2, 99.4 PSI) 27.00-49-48PR (if equipped) 0.55 MPa (5.60 kgf/cm2, 79.52 PSI)