. OPERATION OPERATION CHECK BRAKING CAPACITY OF EMERGENCY BRAKE WARNING CHECK EMERGENCY STEERING 3 - 63 If the machine moves, it will lead t o the serious human injury. If the machine starts to move while che cking the braking capacity lower the engine speed and set th e shift lever to N position. Then set the parking brake lever to PARK Check the braking capacity of the emergency brake as follows. 1. Set the air pressure to the ground, set the parking br and move emergency br position. 2. Set gear shift lever (2) to engine speed, and check even when the engine reac not move, it is normal. 3.
Lower the engine speed a Set parking brake valve le maximum with the machine on flat ake valve lever to TRAVEL position ake lever (1) to the ON (applied) the D position, gradually raise the that the machine does not move hes full speed. If the machine does nd set the shift lever to N position. ver to PARKING position. Check manual emergency steering y to the ON position. switch (1) ON, and check that the 1. Turn the starting switch ke 2. Turn emergency steering steering wheel can be ope If the steering wheel cann Komatsu distributor. 1. Turn the starting switch ke rated. ot be operated, please contact your Check auto-emergency steering 1. Turn the starting switch key engine. 2.
Check that the air pressur pull retarder lever (2) fully 3. Turn the starting switch ke 4. Check that the emergen steering can be operated valve lever (3) is set to the 1. Turn the starting switch key to the START position and start the e gauge is in the green range, then and stop the engine. y to the ON position. cy steering is actuated and the 1.5 seconds after parking brake TRAVEL position. CHECK BACKUP ALARM witch to the ON position. 1. Turn the engine starting s 2. Place the gear shift lever i n the R position and check that the backup alarm is working