. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN OR REPLACE AIR CLEANER WARNING engine and damage it. CLEANING OR REPLACING OUTER ELEMENT 4 - 19 I f inspection, c leaning, or maintenance is carried o ut with the engine running, dirt will get into th erations. Always stop th e engine before ca rrying out these op When using co mpressed air, ther e is danger that dir t may be blown around and cause serious injur Always use pro tective glasses, d ust mask, and othe r protective equipment. CHECKING Clean the air cle arner element if the dust indicato r (1) shows red. NOTICE Do not clean the appears.
air cleaner element before red piston in dust indicator If th e element is cl eaned frequently before the red pist on appears, the air cleaner will not be able to display it s performance fully , and the cleaning efficiency will also go down. In a ddition, during the cleaning ope ration, more dirt st uck to the element will fall inside the inner element. Remove the wing nut (2), th en remove the ou ter element (3).
Clean the ai r cleaner body i nterior and the co Direct dry co mpressed air (le ss than 0.69 MPa (7 kgf/ cm2, 99.4 PSI)) to the from outside 1) Remove has bee 2) Replace repeated element 3) Replace indicator cleaned cleaned 4) Check in element from in side along its fol along its folds and again from in one seal from t he element when ever the element ner element mo unting nuts for lo oseness and, if er installing t he