eng — CHECK ALTERNATOR BELT, ADJUST

. MAINTENANCE SERVICE PROCEDURE CHECK ALTERNATOR BELT, ADJUST REMARK operation. 4 - 45 CHECKIN The belt pressed with the thumb (with a force of approx. 58 .8 N (6 k gf) a t a poin t midway between the dr ive pulley and alterna tor pulle ADJUSTI 1. Loos en bolt (1) and lock 2. Rotat e adjusting nut (3) s o that the deflection is approx. 15 mm 0.6 i n) (at a force of app rox. 58.8 N (6 kgf).) 3. After adjustment, tighten lock nut (2) and bolt ( 1) securely. Check particular, check that the V -belt does not touch th e botto m of the V-groove.

If any abnormality is fou If any replacement of the pulley If the V -belt is so lengthen edthat it cannot be adj usted an y more o r if it has any cuts or cra When adjusting the V-bel directly with a bar, but put a wood piece, etc. in-betwee n them. If the V-belt has been re placed with a new pa rt, there be initial elongation, so inspe ct and adjust it again a fter one-hou r of