. MAINTENANCE SERVICE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST 4 - 46 CHECKIN The belt s hould normally deflect by 10 mm (0.4 in) when pr essed with the t humb (with a force of approx. 58.8 N (6 kgf)) at a point midway b etwee n the air compre ssor pulley and drive pulley ADJUSTIN 1. Loose n bolt (1) a nd lock nut 2. Rotat e adjusting nut (2) so th at the deflection is approx. 1 0 mm 0.4 in ) (at a forc e of approx. 58.8 N (6 kgf)) 3. After adjustment, tighten loc k nut (3) and bo lt (1) secure 4. Check for d amag e to the pull eys, and wear of the V-groov e and V-belt .
Be p articularly carefu l to check that t he V-belt is not in conta ct with the bottom of th e V-groove. 5. I f the V-bel t is s o lengthene d that it cannot more or if it has a ny cuts or cracks, replace 6. I f the V-bel t has been replac ed with a new be nitial elongation, so adjust t he belt again aft er operating for 2 o 3 d