eng — CHECK WEAR OF PARKING BRAKE PADS

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING CHECK WEAR OF PARKING BRAKE PADS WARNING 4 - 50 If the machine mo ves, it will lea d to serious injury or death. If machine begins to move during the ins pection of braking ca pacity lowe r the engine speed immediately, set gear sh ift lever at N p osition, and then depress the foot br Check t he braki ng capacity of the parking b rake as follows. 1. Set the air p ressure to the maximum w ith the machine on flat ground, and set parking brake valve lever (1) to the PARKING position.

Set gear sh ift lever (2) to the D position, gradually raise the ed, and check that the machine does not move engine spe eck that the ma chine does not move eve n when t he engine r eaches full spee d. If the machin e does not move, it is normal. d, set gear shift lever at N position. If 3. Lower the e ngine spee position If any problem is found, a sk your Komats u distributor for r epair. Neve r pu t any oil or grease on the surface of the Measur e the thi ckness of th e pad, and if it is less than 1. 5 mm (0.06 in), contact you r Komatsu d