. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AUTOMATIC SUSPENSION WARNING 4 - 51 If for any reason the mai strictly follow the next r One should sit on th ntenance is performed while the engine is running ules. e operator's seat, preparing to stop the engine a any moment, and co ntact with the other. prevent the dump body fro Set the dump lever at HOLD position to preven t the dump body fro moving. Also, set the parking brake valve lever at PARKING position t prevent the machine from moving. When working near f an or belts, do not bring you r bod y or an y material closer that can be dr agged into. Do not touch the ope ration lever.
If for any reaso n you have t o move th lever, be sure to cont act with the other person to let hi m/her move to th safe area. If the materials or to ols are dropped onto fan or belts , they fly away o cut. Never drop or in sert materials or tools. . Remove the cov er (1) used for inspection . Check the positi ons of the link. Check that it moves to th s: when empty: soft s depressed: medium lever is at any position other than FLOAT following position For normal travel when empty: soft When the brake i When the dump hard.
If any problem is fou nd, please contact your Komatsu di stributor for inspection and adjustm If operations are carri ed out on muddy or wet g roun d, mu d will stic k to the link, and the movem ent may become slow so check and clean.