. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER OPERATING PAYLOAD METER OPERATION OF SWITCHES 6 - 5 Resetting power (the power can be reset The display for the first 3 seconds is 8 8:88, and after that, the time is displayed for 7 second After 10 seconds, the normal display i The printer feeds one line of paper an CONTENT OF DISPLAY d the shift lever is at neutral, the actual load is displayed. r if the dump lever is not at FLOAT, the display is 0. shift lever is not at neutral, the time display is given.
When the dump lever is at FLOAT an d the shift lever is at neutral, the actual load is displaye When the load is less than 3.9 tons, o r if the dump lever is not at FLOAT, the display is If the dump lever is at FLOAT but the A maximum of 200 cycles of data can be written to memory. If this level is exceeded, FULL is displayed. If FULL is displayed, print out the data and cle ar the data from the memory. For details, see "DELET ING DATA FROM MEMORY (PAGE 6-7)". After completion of operations, we rec ommend that you stop the machine, print out the data, and clear th e data from memory. There may be a slight change betwe dumping point.
en the load displayed at the loading point and the load displayed at the mp lever is raised. ped, it is possible to carry out accurate calculation if the load is dumped Save the data to memory when the du When the machine is completely stop umped when the swaying of the machine has completely stopped. We recommend that the slope at the dumpin g point be kept to within ±5 degrees. When the value displayed by the paylo ad meter becomes stable, move the dump lever to the RAISE position. If the machine is still swaying violently w hen the dump lever is moved to the RAISE position, ** *** is printed when the print out is made.
When the dump lever is returned from LOWER to FLOAT, wait for at least 5 seconds before t urning the s tarting switch OFF. WHEN CARRYING OUT CALIBRATION Carry out calibration at the following occ When the machine is delivered, and o When the gas pressure and oil have b (When the suspension has been adju When the machine has been modified and the unladen weight has changed more than 100 k g (221 When the suspension pressure senso When other modifications have been When the built-in battery has been rep When CAL is displayed.