. ATTACHMENTS, OPTIONS ARSC (AUTOMATIC RETARDER SPEED CONTROL) METHOD OF OPERATION METHOD OF SPEED SETTING WARNING METHOD OF CARRYING OUT FINE ADJUSTMENT OF SET TRAVEL SPEED To raise the set travel speed 1 km/h (0.6 MPH), push the ARSC set lever forward once. To decrease the set travel speed 1 km/h (0.6 MPH), pull the ARSC set lever back once. 6 - 30 ACTUATION OF ARSC SYSTEM m switch is ON. ssed, the travel speed at that moment is set as the downhill travel wnhill speed, the retarder is automatically actuated. avel speed display and is stored in memory.
ARSC is being operated, the ARSC is canceled and the speed The ARSC system is actuated when the syste If the set switch on the ARSC set lever is pre speed. If the travel speed exceeds the set do The set travel speed is displayed on the set tr If the accelerator pedal is pressed while the increases. If the brake pedal or retarder control lever are operated while the ARSC is being operated, it is possible to reduce the machine speed or stop in the same way a s during normal brake operations.
If the speed is set to a speed that exceeds the maxi mum permissible speed obtained from the brake performance graph , there is danger that there will be overheating and that the ret arder brake may be damaged. Always set the speed so that it does n ot exceed the maximum permissible speed. If the actual machine speed during the setting operation is less than 10 km/h (6.2 MPH), the speed is set to 10 km/h (6.2 MPH). In all other cases, it is set to the a ctual travel speed. the selection of the gearshift lever as follows. The travel speeds that can be set depend on When the shift lever is at the D, 5, 4, 3, or L pos itions, the range for the set speed is 10 to 55 km/h (6.2 to 34. 2 MPH).
It is impossible to set the speed when the shif t lever is at the N or R positions. REMARK e set travel speed. t at the same time, the cancel operation is given priority. t at the same time, the tap up operation is given priority. out at the same time, the tap down operation is given priority. for making fine adjustment of the set travel speed.
Release the ARSC set lever after changing th If the set and cancel operations are carried ou If the set and tap up operations are carried ou If the set and tap down operations are carried out at the same time, the tap down operation is given priori The tap up and tap down operations are used It is possible to adjust the set travel speed up t o ± 5 km/h (3.1 MPH) when traveling in ARSC (when the acc elerator pedal is released). When the accelerator pedal is being depressed, the ARSC is canceled, so it is possible to adjust the set speed freely in a range from 10 to 55 k m/h (from 6.2 to 34.1 MPH).
METHOD OF INCREASING SET TRAVEL SPEE D If it is desired to increase the set speed, depre ss the accelerator pedal to increase speed, and when the de sired set travel speed is reached, press the set switch on the ARSC set lever. The set travel speed will be changed to the new speed.