. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM PRECAUTIONS WHEN HANDLING AUTO-GREASING SYSTEM BLEEDING AIR FROM GREASE CIRCUIT WARNING changes to normal grease, turn manual lube switch (3) OFF. 6 - 48 When bleeding the air , the operation must be carrie d out b y two worker s who c annot see each other: o ne in the operator's seat and one under the ma chine. When carryin g out the operation, ma intain contact with e ach other and ch eck that you understand the content of your pa rtner's work. If the m achine is moved witho ut warning, there is d anger that the wo rker operating und er the machine will be caugh t in the machine an d suffer se rious p erson al injur y.
NOTICE Always bleed the air fr om the grease circu it. If there is air i n the g rease circuit, the gre ase pressure will not rise to the specified pressure, and this will lead to damage fro m insuffici ent lubricatio n at al l parts o f the m achine. 1. Remove blind pl ug (2) from the tip of injecto r manifold ( 1) at th rear right of the front axle of the m 2. Turn the startin 3. Turn manual lub Milky white grea blind plug (2) in se mixed with air manifold (1). W comes o hen this ut fro milky m the white hole f greas 5. Install blind plug (2) to manifold (1