. HIGH ALTITUDE SPECIFICATIONS SERVICE PROCEDURE SERVICE PROCEDURE WARNING (1) to its original position and open 7 - 3 Always rele ase the pressu re inside the tan k before removing the oil fille r. If the p ressure is not rel eased, there is danger t hat oil will spurt ou t. Close the p ressurizing valv e before removing the oil fille When carr ying out any of the following operations, alw ays stop th e engin e and release th e pressure inside the tank as follows.
IL LEVEL IN REAR BRAKE COOLING OIL TANK, ADD OIL (PAGE 3-60)", IL LEVEL IN STEERING AND HOIST OIL TANK, ADD OIL (PAGE 3-60)", "CHECK O IL LEVEL IN REAR BRAK E COOLING OI L TANK, A DD OIL (PAGE 3-60)", "CHECK O IL LEVEL IN STEERING AND HOIST OIL TANK, A DD OIL (PAGE 3-60)", "REPLAC E STEERING , HOIST OIL TANK AND REA R BRAKE COOLING OIL TANK F ILTER ELEMENT (P AGE 4-60)", "C HANGE OIL I N STEERING , HOIST OIL TA NK (PAGE 4-63)", "CHANGE OIL IN REA R BRAKE CO OLING OIL TAN K (PAGE 1. Pull pressurizing valve (1) to shut off the pressure coming fro the air tank. 2. After shutting off the pressure coming from the air tank, turn th oil filler slowly and remove it. 3.
After carrying out the procedure in Steps 1 and 2, change th oil. 1. Pull pr essurizing va lve (1) to shut off the pressure coming fro tank. 2. After s hutting off the pressure com ing from the air t ank, turn th slowly and r emove it. 3. After c arrying out th e procedure i n Steps 1 and 2, change th 4. Return pressurizing ssurizing cir NOTICE If the pressu rizing valve is not returned to i ts original positio n, it will cau cavitation a nd the hydrauli c pump may be damaged. CHECK BEFORE STARTING Carry out t hese checks at the beginni ng of each day' s work bef ore starting Check that pressurizing valve (1) is at the OPEN posi tion and th there is no dirt or mud s tuck to muffle