eng — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS STARTING SWITCH This switch (1) is used to start or stop the engine. OFF position 3 - 23 At this position, the starti ng switch key can be inserted or removed When the key is turned t o this position, all the electric c ircuits are switched off and the eng ON position In this position, electric circuits. current flows in the charging and lamp key at the ON position while the engine is Keep the starting switch key at the ON position while the engine i running. When turning the startin g switch ON or OFF, if the start ing switc h is held at a position between ON and OFF, the controller may detect this as a problem.

If this happens, return the starting switch to the OFF position, then operate it as usual to the ON pos ition. START position This is the position to sta rt the engine. Hold the key at this positi on while cranking. R elease the key immediately after the engine has bee n started. The key will return to the ON position when release d. LAMP SWITCH This (2) lights up the hea d lamps, side clearance lamps, tail lamps machine monitor lighting , and rear lamps. (a) position: OFF (b) position: Side clearan ce lamps, tail lamps, rear lamps , machin monitor light ing light up (c) position:

The head la mps light up in addition to the la mps in the (b) position The lamp switch can be operated regardless of the position of the TURN SIGNAL LEVER he turn signal lamp. ever forward er back This lever (2) operates t (a)Right turn: Push the l (b)Left turn: Push the lev When the lever is operat ed, the turn signal pilot lamp als o flashes The lever is automatica lly returned when the steering wheel i d. turned back. If the lever does not return, move it by han