. OPERATION EXPLANATION OF COMPONENTS 3 - 24 DIMMER SWITCH This (2) is used to switch the head l amp s between high beam and low (a) L (b) CAUTION/PILOT LAMP BULB CHECK SWITC H Pre ss this switc h (3) when the starting s witch i s at t he ON position to c heck for any blown bulbs. EXHAUST BRAKE SWITCH This switch (4) s hows the operating condition o f the exhaus t brake. If it is pushed once, it lights up; and it goes off when it is pushed in. position (Light is off): p; an pushed aga OFF position (L The exhaust bra ke is actuated when the brake peda l is depressed or th e retarder c ontrol lever is operated i f the t orque converter is in the lockup cond ition. ht is on):
rake is actuated when the accelerator pedal is orque converter is in the lockup condition. ON position (Lig ht is on): The exhaust b rake is actuated hen ccelerat released if the t orque converter is i n the locku p condition.