Yanmar — 4.3.1 Disassembly

4. Disassembly and reassembly (13)Removing the fuel injection pipe Fuel injection pipe retainer 1) Remove the fuel injection pipe retainer. 2) Loosen the cap nuts on both ends of the fuel injection pipe and remove the fuel injection pipe. No. 1 No. 2 No. 3 Note: When loosening the cap nut, loosen the nut with holding the return pipe by hand so that the fuel return pipe may not break.

Fuel injection pipe Fuel injection pipe Fuel injection pipe Fuel injection pipe Cap nut Cap nut Cap nut Fuel injection pump Fuel return pipe Fuel return pipe Fuel return pipe Fuel return pipe Fuel injection nozzle 3) Remove the fuel return pipe (fuel nozzle-fuel pump) (14)Removing the fresh water pump Remove the fresh water pump and gasket. 82 Cylinder head Gasket Fresh water pump O-ring