Yanmar — 4.3.1 Disassembly

4. Disassembly and reassembly (15)Removing the fuel injection nozzles Loosen the fuel nozzles and remove them from the cylinder head. Fuel injection nozzle Nozzle protector Nozzle seat Nozzle seat Cylinder head (16)Remove the fuel injection pump 1) Loosen the drive gear nut for fuel pump drive gear, and pull out the fuel pump drive gear /flange assembly with an extraction tool. Note: Don't disassemble the pump flange and the pump drive gear. 2) Loosen the three (3) nuts for the fuel pump and remove the fuel injection pump and O-ring from the gear case. Gear case cover Fuel injection pump Pump flange bolt Pump flange Fuel pump drive gear Don’t disassemble! Pump flange bolt Drive gear nut 83