Yanmar — 4.3.1 Disassembly

4. Disassembly and reassembly (17)Removing the rocker arm shaft assembly 1) Loosen the hexagon head bolts and remove the rocker arm cover. Don’t disassemble the cross-recessed-hand bolts. Note: Don't loosen the cross-recessed-head bolts on the rocker arm cover, when removing the rocker arm cover. 2) Remove the bolts(s) for the rocker arm shaft support, and remove the entire rocker arm shaft assembly. 3) Pull out the push rods. (18)Removing the cylinder head 1) Loosen the cylinder head bolts with a torque wrench, and remove the cylinder head. 2) Remove the cylinder head gasket. (19)Removing the marine gearbox Loosen the bolts for the clutch case flange, and remove the gearbox assembly.

(20)Removing the flywheel Loosen the flywheel bolts and remove the flywheel. Bolt Flywheel Note: Be careful not to scratch the ring gear. Flywheel housing Ring gear (Removing flywheel) 84