4. Disassembly and reassembly (34)Removing the main bearing 1) Remove the main bearing bolts. 2) Remove the main bearing cap and lower main bearing metal. NOTE: The thrust metal (lower) is mounted to the base main bearing cap. (35)Removing the crankshaft 1) Remove the crankshaft NOTE: 1) The thrust metal (upper) is mounted to the standard main bearing of the cylinder block. 2) Remove the main bearing metal (upper) from the cylinder block. Cylinder block Crankshaft (36)Removing the tappets Remove the tappets from the tappet holes in the cylinder black. Thrust metal NOTE: 1) Be careful to keep all disassembled parts in order. 2) Prepare clear and adequate area for parts and a container(s).
3) Prepare a cleaner before disassembling. Main bearing (Base) Main bearing Main bearing bolt (Removing main bearing and crankshaft) 88