Yanmar — 4.3.2 Reassembly

4. Disassembly and reassembly (11) Mounting the idling gear 1) Mount the idling gear so that the mark of the idle gear shaft upward. Mark Upside Oil hole (Idle gear shaft) 2) Align the "A" and "B" match marks of the idle gear with the match marks of the crankshaft gear and the camshaft gear. 3) Measure the idle gear, camshaft gear and crankshaft gear backlash. Fuel injection pump drive gear Camshaft gear mm C C B B Idle gear A A Crankshaft gear Direction of rotation (Gear train) (12) Mounting the lube oil pump Tighten the lube oil pump with bolts to the gear case cover. Cover Outer rotor Inner rotor Lube oil applied N•m (kgf•m) Control valve Gear case cover NOTE:

1) Before installing the outer /inner rotors, coat them with lube oil (10W30 lube oil ). 2) Assemble the rotor so that the mark of the rotor may come to the cover side. 3) Confirm that the rotor rotates smoothly. 93 Backlash Standard Limit 0.07-0.15 0.17 Tightening torque 5.9-7.9 (0.6-0.8)