Yanmar — 5.3.3 Piston rings

5. Inspection and servicing of basic engine parts 5.3.3 Piston rings There are two compression rings and one oil ring. The absence of an oil ring on the piston skirt prevents oil from being kept on the thrust surface and in turn provides good lubrication. Top ring Second ring Oil ring (Ring components) (1) Measuring the rings. Measure the thickness and width of the rings, and the ring-to-groove clearance after installation. Replace if wear exceed the limit.

3YM30 mm Width Thickness (Measuring side clearance) 3YM20/2YM15 mm 118R1 Standard Limit Top ring Groove width 1.550-1.570 - Ring width 1.470-1.490 1.450 Clearance 0.060-0.100 - Second ring Groove width 1.580-1.595 1.695 Ring width 1.430-1.450 1.410 Clearance 0.013-0.165 0.285 Oil ring Groove width 3.010-3.030 3.130 Ring width 2.970-2.990 2.950 Clearance 0.020-0.060 0.180 Standard Limit Top ring Groove width 1.550-1.570 - Ring width 1.470-1.490 1.450 Clearance 0.060-0.100 - Second ring Groove width 1.540-1.560 1.660 Ring width 1.470-1.490 1.450 Clearance 0.050-0.090 0.210 Oil ring Groove width 3.010-3.030 3.130 Ring width 2.970-3.010 2.950 Clearance 0.020-0.060 0.180