5. Inspection and servicing of basic engine parts (3) Removing the piston pin A floating type piston pin is used in this engine. The piston pin can be pressed into the piston pin hole at room temperature (Coat with oil to make it slide easily). 5.3.2 Piston pin Measure the outer diameter and replace the pin if it is excessively worn. Measure at positions a and b in directions A and B. A a b B (Piston pin hole) Measure at positions a, b and c in directions A and B. a b c A B (Piston pin outside diameter) 117R1 Tolerance Size mark Piston outside diameter. D2 Tolerance below + 0.005 0 min. below 0 -0.005 min. Size mark ML MS Cylinder inside diameter D1 +0.030 max. +0.020 min.
L { X below +0.020 +0.010 min. M { { below +0.010 0 min. S X { Model Cylinder inside diameter D1 Piston outside diameter. D2 3YM30 76 75.970 3YM20/2YM15 70 69.975 Standard Limit Piston pin hole inside dia. 22.000-22.009 22.039 Piston pin outside dia. 21.995-22.000 21.965 Clearance 0.000-0.014 0.074