Yanmar — 5.4.1 Inspecting the connection rod

5. Inspection and servicing of basic engine parts 5.4 Connecting rod The connecting rod is made of high-strength forged carbon steel. The large end with the aluminium metal can be separated into two and the small end has a 2-layer copper alloy coil bushing. 5.4.1 Inspecting the connection rod 100 mm 100 mm (1) Twist and parallelism of the large and small ends Insert the measuring tool into the large and small ends of the connecting rod. Measure the extent of twist and parallelism and replace if they exceed the tolerance.

Parallelism mm Twist Mandrel (Twist and parallelism measurement) Connecting rod aligner Twist measurement using a connecting rod aligner ( ) 121 Connecting rod Connecting rod (bid end cap) Piston pin bushing Crank pin metal Connecting rod bolt Standard Limit Connecting rod twist and parallelism Less than 0.03 per 100 mm 0.08