Yanmar — 5.4.4 Assembling piston and connecting rod

5. Inspection and servicing of basic engine parts 5.4.3 Piston pin bushing (1) Measuring piston pin clearance. Excessive piston pin bushing wear may result in damage to the piston pin or the piston itself. Measure the piston pin bushing inside diameter and the piston pin outside diameter. Calculate the oil clearance from the measured values.

(Refer to 5.3.2 for the piston pin.) mm Cylinder gage (Connecting rod small end) 5.4.4 Assembling piston and connecting rod (Camshaft side) Piston ID mark The piston and connecting rod should be assembled so that the match mark on the connecting rod large end faced the fuel nozzle side and the combustion chamber above the piston is close to the fuel nozzle. (Nozzle side) (Flywheel side) Cylinder size mark Piston ID mark Embossed mark (Flywheel side) Match mark Assembly direction of connecting rod and piston ( ) 124R1 Standard Limit Piston pin metal I.D. 22.025-22.038 22.068 Pin O.D. 21.991-22.000 21.963 Clearance 0.025-0.047 0.105