Yanmar — 8.3.2 Lube oil filter replacement

8. Lubrication system 8.3 Lube oil filter 8.3.1 Lube oil filter construction The lube oil filter is a full-flow paper element type mounted to the side of the cylinder block. The cartridge type filter is easy to remove. To prevent seizure in the event of the filter clogging up, a bypass circuit is provided in the oil filter. When the difference of the pressure in front and behind the paper element reaches 0.08-0.12 MPa (0.8-1.2 kgf/cm 2 ), the bypass valve inside the filter opens and the lube oil is sent to each part automatically as an emergency measure, without passing through the filter.

Cylinder block Lube oil pressure switch Lube oil filter 8.3.2 Lube oil filter replacement Refer to 2.2.2(2). 155 Type Full flow, paper element Filtration area 0.10 m2 Discharge volume 30 l/min Pressure loss 0.03-0.05 MPa (0.3-0.5 kgf/cm2) By-pass valve regulating pressure 0.08-0.12 MPa (0.8-1.2 kgf/cm2)