Yanmar — 12.7.1 Oil pressure alarm

12. Electrical System 12.7 Warning devices 12.7.1 Oil pressure alarm If the engine oil pressure is below 0.01-0.03 MPa (0.1-0.3 kgf/cm 2 , 1.42-4.26 lb/in. 2 ), with the main switch in the ON position, the contacts of the oil pressure are closed by a spring and the lamp is illuminated through the lamp J oil pressure switch J ground circuit system. If the oil pressure is normal, the contacts of the switch are opened by the lubricating oil pressure and the lamp remains off.

Pilot lamp Fuse Main switch Cylinder block Alarm buzzer Battery Lube oil pressure switch Oil pressure switch Oil pressure (Oil pressure alarm circuit) Lube oil filter Spring Contacts Oil pressure (Oil pressure switch) 197 Rated voltage 12V Operating pressure 0.04-0.06 MPa (0.4-0.6 kgf/cm2) Lamp capacity 5 W