3. Troubleshooting THE ENGINE SUDDENLY STOPS. (III-2) Clean. (IV-1) Remove and repair or replace. Disassemble and clean cooling water pump and check cooling water system. (IV-2) Chart 1 THE ENGINE SUDDENLY STOPS. (2) Sticking of governor sleeve (2) Overloading due to insufficient cooling water (I-2) Bleed air. (II-1) Replace. (II-2) Clean carefully to insure good working order. (I-3) Remove water from drain and fuel oil system and prime. (I-4) Check and make necessary repairs.
(1) Damage to governor spring (1) Seizure of moving parts (II) Governor trouble (IV) Miscellaneous (7) Problem with fuel feeding pump (3) Leakage from lube oil safety valve Relay operation triggered by low lube oil pressure (4) Fuel oil cock closed (5) Clogging of fuel oil filter (6) Damage in fuel oil system (4) Trouble with lube oil pump (3) Water in fuel oil tank (I) Fuel oil supply cut off (I-7) Check and make necessary repairs. (1) Insufficient oil in fuel oil tank (2) Air in fuel oil system and fuel injection pump TROUBLE AND TROUBLESHOOTING (I-1) Add fuel oil and prime. (I-5) Clean. (I-6) Replace.
Countermeasure Cause and Effect Countermeasure 51 Chart 1 TROUBLE AND TROUBLESHOOTING THE ENGINE SUDDENLY STOPS. Chart 1 TROUBLE AND TROUBLESHOOTING THE ENGINE SUDDENLY STOPS. Countermeasure (I-1) Add fuel oil and prime. (I-2) Bleed air. (I-3) Remove water from drain and fuel oil system and prime. (I-4) Check and make necessary repairs. (I-5) Clean. (I-6) Replace. (I-7) Check and make necessary repairs. (II-1) Replace. (II-2) Clean carefully to insure good working order.