Yanmar — 3.2 Quick reference chart for troubleshooting

3. Troubleshooting Chart 3 POOR EXHAUST COLOR (II-1) Clean. (II-2) Check, repair or replace. (II-3) Adjust. (II-4) Check, repair or replace. (II-5) Clean. (II) Faulty fuel injection valve POOR EXHAUST COLOR (3) Carbon deposit in suction valves (III-1) Clean. (IV-1) Reduce load. (IV-2) Adjust quantity of oil. (IV-3) Clean. (IV-4) Clean. (IV-5) Reduce. with new oil. (IV-6) Clean.

(2) Too great a quantity of lube oil (6) Clogging in exhaust system Cause (III) Clogged intake air filter (IV) Miscellaneous (1) Faulty plunger operation (1) Injection opening is clogged (2) Worn plunger (2) Sticking of valve needle (5) Carbon deposit (4) Faulty spry condition (3) Low injection pressure (4) Uneven quantity of fuel injected (5) Irregular fuel injection timing (4) Dirty air cooler (5) Poor quality fuel oil (1) Overloading (I-1) Check, repair or replace. (I-2) Replace. (I-3) Check, repair or replace. (I-4) Adjust. (I-5) Adjust.

(1) Air in the fuel injection pump (I) Faulty fuel injection pump Trouble and Troubleshooting TROUBLE AND TROUBLESHOOTING (3) Faulty ejection valve (1) Clogged filter Countermeasure Cause and Effect Countermeasure CYLINDER OUTPUT IS UNEVEN COUNTERMEASURE (5) Damaged exhaust union packing Chart 2 (I -7) Disassemble and clean and repair replace. CYLINDER OUTPUT IS UNEVEN system (6) Loose pinion screw (7) Faulty fuel injection pump tappet (I) Uneven quantity of fuel oil injected (I-1) Bleed air. (I-2) Disassemble and clean. (I-3) Replace. (I-4) Repair or replace. (I-5) Replace. (I-6) Tighten firmly.

(2) Faulty operation of plunger (3) Damaged plunger spring (4) Faulty fuel oil ejection valve spring (3) Insufficient injection pressure in injection valves (II-1) Check and repair. (II-2) Replace. (II-3) Adjust. (II-4) Adjust. (II-5) Clean. Countermeasure Cause and Effect Countermeasure 52 Chart 2 TROUBLE AND TROUBLESHOOTING CYLINDER OUTPUT IS UNEVEN COUNTERMEASURE Chart 2 TROUBLE AND TROUBLESHOOTING CYLINDER OUTPUT IS UNEVEN COUNTERMEASURE Countermeasure (I-1) Bleed air. (I -7) Disassemble and clean (I-2) Disassemble and clean. and repair replace. (I-3) Replace. (I-4) Repair or replace. (I-5) Replace. (I-6) Tighten firmly.

Chart 3 Trouble and Troubleshooting POOR EXHAUST COLOR Countermeasure (I-1) Check, repair or replace. (I-2) Replace. (I-3) Check, repair or replace. (I-4) Adjust. (I-5) Adjust. (II-1) Clean. (II-2) Check, repair or replace. (II-3) Adjust. (II-4) Check, repair or replace. (II-5) Clean.