3. Troubleshooting Chart 6 KNOCKING KNOCKING (2) Fuel pressure is too high (IV-1) Check cooling water pump and lap valves. (IV-2) Replace. (IV-3) Replace. (IV-4) Replace with good fuel oil. (IV-5) Replace with good fuel oil. (IV-6) Check and repair. (1) Low injection pressure (1) Early fuel injection (4) Poor quality fuel oil (5) Water mixed in fuel oil (II-1) Delay injection timing. (II-2) Adjust standard injection pressure.
(6) Incorrect pressure (II) Faulty fuel injected (IV) Miscellaneous (1) Insufficient cooling water (2) Excess piston clearance (3) Excess bearing clearance (3) Sticking of valve needle (4) Faulty injection spray (I) Faulty fuel injection valve (2) Damaged fuel valve spring (I-1) Increase injection pressure. (I-2) Replace. (I-3) Disassemble and lap. (I-4) Disassemble and repair. TROUBLE AND TROUBLESHOOTING Countermeasure Cause and Effect Countermeasure 55 Chart 6 TROUBLE AND TROUBLESHOOTING KNOCKING Chart 6 TROUBLE AND TROUBLESHOOTING KNOCKING Countermeasure (I-1) Increase injection pressure. (I-2) Replace. (I-3) Disassemble and lap. (I-4) Disassemble and repair.
(II-1) Delay injection timing. (II-2) Adjust standard injection pressure.