Cab Radio - Section 70 OM7005 Page 70-2 BASIC OPERATION Storing and Recalling Broadcast Frequencies Favorite stations can be easily selected by saving the frequency to the six preset buttons (14, Figure 70- 1). When selecting a favorite, press the button (1 through 6) corresponding to the saved frequency. Power ON/OFF and Selecting a Source To turn the unit ON, press the SOURCE button (3, Figure 70-1). Press SOURCE repeatedly to select between tuner or tape if a cassette tape has been inserted. 1. To store a frequency to a preset button, select the desired frequency. Note: This unit is capable of controlling an optional external CD player.
If this option is installed, the CD player will be an additional choice when using the SOURCE select button. a. Choose one of the buttons (1 through 6), press it and hold until the preset number stops flashing. To turn the unit OFF, press SOURCE and hold until the unit turns OFF. b. The number you have pressed will flash in the preset number indicator (5, Figure 70-2) and then remain lit. c. The next time the preset number button is pressed, the frequency will be recalled from memory and automatically tuned by the receiver. To Listen To The Radio 1. Press SOURCE (3, Figure 70-1) to select tuner. 2. Press BAND (9) to select a choice of three available FM bands, F1, F2 and F3 or the AM band.
The selected band (2, Figure 70-2) will be displayed in the Display WIndow (1). 2. Repeat the above procedure for the remaining buttons. 3. By changing bands and repeating the above procedures, an additional 6 frequencies can be stored in F2 and another 6 in the F3 FM bands. In addition, 6 more frequencies can be stored in the AM band. 3. To manually tune a frequency, tap the arrow buttons (16, Figure 70-1). The frequencies will move up or down step by step. The selected frequency (3, Figure 70-2) will be displayed in the Display Window. If the broadcast is stereo, indicator (4) will appear. Tuning Strong Signals 4.
To use the SEEK function, press and hold either arrow button (16) for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. Local seek tuning allows you to tune in only those stations with sufficiently strong signals for good reception. 1. Press the LOCAL/BSM button (8, Figure 70-1) to turn local seek tuning on - LOC appears in the Display WIndow. Note: to cancel SEEK tuning, tap either arrow button quickly To skip stations, press and hold either arrow button. When the button is released, seek tuning will resume. 2.
To return to normal seek tuning (to receive more and weaker stations) press the LOCAL/ BSM button to turn local seek tuning off. Storing the Strongest Broadcast Frequencies 5. Use VOLUME control (1) to adjust sound level. Press “+” to increase volume and “-” to decrease volume. BSM (best stations memory) allows you to automati- cally store the six strongest broadcast frequencies under preset tuning buttons 1 - 6 in order of their sig- nal strength. 1. To use the BSM feature, press LOCAL/BSM (8, Figure 70-1) and hold until BSM turns on. 2. BSM will begin to flash. While BSM is flashing, the six strongest stations will be stored under preset buttons 1 - 6 in order of their signal strength.
FIGURE 70-2. FM STATION SELECTION 3. When finished, BSM stops flashing. 4. To cancel the process, press LOCAL/BSM. 1. Display Window 2. Band Indicator 3. Frequency Indicator 4. Stereo Indicator 5. Preset Number Note: Storing frequencies with BSM may cancel frequencies you have previously saved using 1 -6.