OM7005 Cab Radio - Section 70 Page 70-3 Playing a Cassette Tape 1. Insert a cassette tape into the tape player slot (6, Figure 70-1). Playback will automatically start. Press AUDIO (11, Figure 70-1) to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: 2. After the tape has been inserted, press SOURCE to select the cassette player (press SOURCE button until cassette player is selected as the source). FAD (balance adjustment) BAS (bass adjustment) TRE (treble adjustment) LOUD (loudness) 3. Adjust the volume using the VOLUME control (1). SLA (source level adjustment) (Not available when FM tuner is selected) 4.
To fast forward or rewind, press FAST FOR- WARD or REWIND button (7). To return to the display of each source, press BAND (9). 5. To reverse direction of tape, press both buttons simultaneously. Note: If you do not change any of the audio functions within about 30 seconds, the display will return to the source display. Audio Controls Description and Adjustment Balance Adjustment - The balance controls allow adjustment of sound level balance left to right and front to rear. Do not insert anything other than a cassette tape into the cassette loading slot. 1. Press AUDIO (11, Figure 70-1) until FAD appears on display. (If the balance has been previously adjusted, BAL will be displayed).
Radio Intercept Radio intercept allows you to listen to the radio while the tape is rewinding or fast forwarding. 2. Press VOLUME (1) up/+ or down/– to adjust front/rear speaker balance. 1. Press preset button #6 to turn radio intercept on or off. Note: The HD785-5LC is equipped with 2 speakers (left/right) only. The FAD control is therefore not used but control should be set to . 3. The FAD control is adjustable from FAD F15 – FAD R15. Set control to FAD 0. AUDIO ADJUSTMENTS 4. Press the left/right arrow buttons (16) to adjust the left/right speaker balance. Accessing Audio Controls 5. When either arrow is first pressed, the display will show BAL 0. 6.
Each press of the arrow buttons moves the speaker balance towards the left or right. 7. The BAL control is adjustable from BAL L9 – BAL R9. Adjust control as desired. FIGURE 70-3. AUDIO ADJUSTMENTS There are five stored BTB settings – DYNAMIC, POWER, MAX, CUSTOM and FLAT that can be selected. BTB (bass treble booster) Adjustment Figure 70-3 shows a sample of the display window when audio controls has been selected: 1. AUDIO DISPLAY - Display window (1) shows the status of the audio adjustments Note: CUSTOM is an adjusted setting that you create. When FLAT is selected, no equalization is applied to the sound. 2.
BTB INDICATOR - Indicator is on when the BTB (bass treble booster) control other than FLAT is selected. 1. Press BTB (10, Figure 70-1) to select the desired BTB setting. 3. LOUD INDICATOR - Displays when loudness is turned on. 2. Press repeatedly to switch between the avail- able choices.