Komatsu — Switching the XM Channel Select Setting

Cab Radio - Section 70 OM7005 Page 70-4 The currently selected BTB setting can be modified for personal taste. The modified settings are memo- rized in CUSTOM. The instructions below describe how to reset the adjustments: 4. Source volume is adjustable from SLA +4 to SLA -4. Note: The AM tuner volume level can also be adjusted with the source level adjustment. 3. To adjust bass level - press AUDIO (11) to select BAS (Press AUDIO until BAS appears in display). a. Press VOLUME “+” or “–” to increase or reduce bass level. SETTING THE CLOCK The clock time setting that appears in the display is adjusted as follows: 4.

To adjust treble level - press AUDIO (11) to select TRE (Press AUDIO until TRE appears in display). b. The bass control is adjustable from +6 to -6. 1. Press SOURCE (3, Figure 70-1) and hold until the unit turns off. 2. Press and hold AUDIO (11) until the clock appears in the display. a. Press VOLUME “+” or “–” to increase or reduce treble level. a. Press the arrow buttons (16) to select the segment of the clock display to be set. Each press of the arrow button will select one seg- ment of the clock display: Hour – Minute. b. The treble control is adjustable from +6 to -6. Loudness Adjustment b. When the desired segment is selected, the digits will flash.

The loudness adjustment compensates for the low and high sound ranges when listening at low volume. c. Press VOLUME “+” to increase the selected hour or minute. Press VOLUME “–” to decrease the selected hour or minute. 1. To adjust loudness - press AUDIO (11) to select LOUD (press AUDIO until LOUD appears in dis- play). Note: To cancel clock setting, press BAND (9) or press and hold AUDIO (11) until the unit turns off. a. Press VOLUME “+” to turn loudness on. b. The LOUD indicator (3, Figure 70-3) will appear in the display window. Turning Clock Display on or off. 1. To turn the clock display on or off, press and hold the CLOCK button (2).

Each press and hold of the CLOCK button turns the clock dis- play on or off. c. Press VOLUME “–” to turn loudness off. d. Press the arrow buttons (16) to select desired level of loudness. Each press of the left or right arrow selects LOW (low level) or HI (high level). Note: The clock display disappears temporarily when performing other operations, but the clock display appears again after 25 seconds. Note: loudness can also be turned on nor off by pressing and holding LOUDNESS (15) button. XM SATELLITE RECEIVER OPERATION Source Level Adjustment The unit is capable of controlling an optional, external XM satellite digital tuner system.

If installed, refer to the satellite receiver operation manual for operation instructions except for the following: SLA (source level adjustment allows adjustment of the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the level of the FM tuner, which remains unchanged. Switching the XM Channel Select Setting You can switch if you select a channel with a channel number or from a channel category when selecting a channel. 1. Compare the FM tuner volume with the level of the source you wish to adjust. 2. Press AUDIO (11) to select SLA (press AUDIO until SLA appears in the display). 1.

Press LOCAL/BSM (8, Figure 70-1) to select channel select setting. 3. Press VOLUME “+” or “–” to adjust the source volume. Each press of “+” or “–” increases or decreases the source volume. 2. Each press of LOCAL/BSM changes the chan- nel select mode in the following order: channel number select mode – channel category select mode.