OM3210 Operator Cab and Controls Emergency Brake Lever (5, Figure 32-2) The lever (5) actuates the emergency brake. Emergency Brake Released: (TRAVEL/ UNLOCKED position). EMergency Brake Actuated: (APPLIED/ LOCKED position). STOPPING IN EMERGENCY brake ONLY if the foot operated brake pedal and/ or the column mounted retarder lever do not sup- ply enough braking effort to stop the truck. LEVER IN THE FULL APPLIED/ LOCKED position. kPa (3.2 kg/cm 2 ALL brakes (front, rear, & parking brake) with all available pressure. Always apply the parking brake when parking or leaving the machine.
If the emergency brake is applied because of a failure in the air system, the central warning lamp will flash and the alarm buzzer will sound. When the lever is set to the PARKING position, if the transmission shift lever is at any position other than N, the central warning lamp will flash and the alarm buzzer will sound. AFTER MAKING AN EMERGENCY STOP If the air pressure drops below 215.7 kPa (2.2 kg/ cm 2 , 31.2 psi), the parking brake is automatically applied. Immediately after stopping, move parking brake lever (6, Figure 32-2) to the APPLIED/LOCKED position, then place blocks around all wheels to secure the machine.
For instructions to release the brake when it is applied because of failure in the air system, refer to Brake Release, Section 30. Notify maintenance personnel immediately. Do not operate the truck until the cause for the emergency has been determined and repaired. Operation - Section 32 Page 32-5 32-2) • Immediately after making an emergency stop, the parking brake disc will be extremely hot. Do not make any parking brake adjustment until the disc has cooled. The parking brake must be adjusted after an emergency stop. For instructions for releasing the brake, refer to Brake Release, Section 30. Parking Brake Valve Lever (6, Figure 32-2) brake.
This lever (6) is used to apply the parking brake. NCY PARKING: Parking brake actuated. (LOCKED) he emergency ake pedal and/ TRAVEL: Parking brake released. er do not sup- (UNLOCKED) he truck. bring the truck has come to a • When the lever is set to the PARKING position, LEAVE THE the parking brake pilot lamp lights up. KED position. er (6, Figure 32-2) ply the parking brake. actuated. leased. to the PARKING position, lamp lights up.