Komatsu — ASR SYSTEM CONTROLS

OM3210 Operation - Section 32 Operator Cab and Controls Page 32-9 ASR (AUTOMATIC SPIN REGULATOR) / ARSC (Automatic Retard Speed Control) (Optional) ASR SYSTEM CONTROLS The Automatic Spin Regulator (ASR) system is acti- vated using the ASR system switch (1, Figure 32-3). During operation, if wheel slippage is detected, the ASR lamp (8) will light and the ASR system will start functioning. The ASR and ARSC option package allows increased operator safety and convenience. It pro- vides the following features: ASR: A function to prevent drive wheel slippage caused by excessive torque. Under most conditions, the truck can start and travel normally even on a bad or slippery road surface.

When slippage occurs, the system applies the ser- vice brake on the slipping wheel allowing the other wheel to transmit the driving torque ARSC: A method to allow the operator to set the maximum speed of the truck when descending a hill. This feature automatically applies the retarder to prevent the truck from exceeding the maximum desired speed. Refer to Figure 32-3 for the location of the ASR/ ARSC controls, indicator lights, and speed setting display. FIGURE 32-3. AUTOMATIC RETARD SPEED CONTROL AND AUTOMATIC SPIN REGULATOR CONTROLS 1. ASR System Switch (ON/OFF) 2. ARSC System Switch (ON/OFF) 3. ARSC Set Lever 4. Brake Pedal 5. Accelerator Pedal 6. ASR/ARSC Caution Lamp (Red) 7.

ARSC Standby Lamp (Green) 8. ASR Operation Lamp (Green) 9. ARSC Set Speed Display 10. Retarder Control Lever 11. Central Warning Lamp 12. Exhaust Brake Switch