20-10 ENGINE HG 130 Model 6BT5.9-C130 Type Vertical, in-line, water-cooled, 4 strokes Aspiration turbocharged aftercooling No.
of cylinders 6 Bore 102 mm Stroke 120 mm Piston displacement 5.9 L Horsepower - Gross 97kW/2,200rpm Maximum torque 560Nm/1,500rpm Torque rise 32% Air cleaner Dry type Electrical 28V，70A Battery 12V*2；900cca TRANSMISSION AND TORQUE CONVERTER HG13 0 Speed (at rated engine speed) Forward / Reverse (km/h) 1st 6.9/6.9 2nd 10.7/17.3 3rd 17.3/37.8 4th 26 5th 37.8 6th 53.4 TANDEM DRIVE HG130 Oscillating welded box section 614*225 mm Side wall thickness Inner 22 mm Outer 22 mm Whell axle spacing 1,535.4 mm Tandem oscillation ±13 ° FRONT AXLE HG130 Type Solid bar construction welded steel sections Ground clearance at pivot 610 mm Wheel lean angle, right or left ±17 ° Oscillation, total 32 ° REAR AXLE HG130 Alloy steel, heat treated, full floating axle with lock/unlock differential NO-SPIN differential STEERING HG130 Hydraulic power steering providing stopped engine steering meeting ISO 5010 Hydraulic power steering Minimum turning radius 6.6 mm Maximum steering range, right or left 49 ° Articulation ±26 °