20-10-1 BRAKES H G130 Service brake Foot operated, hydraulically actuated on four tandem wheels, 3,671 ㎠ total braking surface Parking brake Flexible shaft control, drum brake FRAME HG1 30 Height 299 mm Width 280 mm Side 16 mm Upper, Lower 16 mm DRAWBAR HG13 0 A-shaped, u-section press formed and welded construction for maximum strength with a replacable drawbar ball Drawbar frame 200*12 mm CIRCLE HG130 Four circle support shoes with replaceable wear surface. Circle teeth hardened on front 180°of circle Diameter (outside) 1,300 mm Circle reversing control hydraulic rotation 360 ° MOLDBOARD HG1 30 Replaceable metal wear inserts, cutting edge and bits. Cutting edge and end bits are hardened.
Dimensions 3,658*580*18 mm Arc radius 329 mm Cutting edge 152*16 mm BLADE RANGE HG130 Circle center shift Right 525 mm Left 530 mm Moldboard side shift Right 815 mm Left 840 mm Maximum shoulder reach outside rear tire (frame straight) Right 1,886 mm Left 1,916 mm Maximum lift above ground 410 mm Maximum cutting depth 560 mm Maximum blade angle, right or left 90 ° Blade tip angle 29-77 ° HYDRAULICS HG130 Hydraulic system of double pump and double multi way valve. Priority braking and steering.
There are hydraulic locks on the scraper lifting, front wheel tilting, traction frame tilting, power tilting, frame articulation and other oil circuits Output (at engine rated prm) 140.8 L/min Maximum system pressure 17.5 MPa