microsoft — HG130 SM인쇄용

Operation When doesn’t turn the steering wheel: When the steering wheel doesn’t turn, the spring lamination makes the valve cartridge and valve sleeve stop at the central position of slot of valve cartridge that its pawl pin was fixed. In such case, the oil ports that connecting valve sleeve with steering cylinder ad manual pump are all isolated with the longitudinal slots of valve cartridge, meanwhile, the little holes in the bottom of valve cartridge are corresponding with the holes in the valve sleeve (totaling 24 holes distributing with equal-space in the 12 double-hole plates of surfaces of valve cartridge or valve sleeve).

When oil feed into priority valve from steering pump and distribute into CF oil-way, flow through the median throttle edges CO of steering gear and decrease the pressure. Then the pressure on both ends of CO will pass to both ends of priority valve spool and because of the balance among hydraulic pressure, spring force and hydrodynamic force, valve spool will around a balanced position. As we know, CO’s strong fluidic resistor can make enough differential pressure to push priority valve spool to left-shift while with little flow, thus can make more left-shift and increase EF(other working oil circuit ) or turndown CF valve port and that makes small flow when cross CF oil circuit.

After, hydraulic oil will flow through EF to left inlet of multi-tandem valve and then into working hydraulic system and back to oil tank. 20-57