the panels.) Check the hoses periodically and, if dust or water collects in them, empty them and clean the air filter element and air filter case. 1. Air filter case check hose 8-37 22. Stop the engine and allow it to cool. If the cool- ant level has dropped after the engine has cooled, add sufficient coolant until it reaches the top of the radiator, and then install the ra- diator cap. 23. Start the engine, and then check for coolant leakage. If any leakage is found, have a Yamaha dealer 24. Install the V-belt cooling duct, and then tighten the clamp screw. 25. Install the panels.
EBU27800 Cleaning the air filter element The air filter element should be cleaned at the in- tervals specified in the periodic maintenance and lubrication chart. Clean the air filter element more frequently if you are riding in unusually wet or dusty areas. There are two check hoses at the bottom of the air filter case, which are located behind panels D and E. (See page 8-8 for an explanation on removing check the cooling system. NOTE: NOTE: 8