4. Install the gasket, and then insert the tailpipe into the muffler and align the bolt holes. 5. Install the bolts and tighten them to the speci- fied torque. Tightening torque: Tailpipe bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 6. Remove the purging bolt. 1. Tailpipe 2. Spark arrester 3. Gasket 8-41 2. Remove the tailpipe, by pulling it out of the muffler, and then remove the gasket. 3. Tap the tailpipe lightly, and then use a wire brush to remove any carbon deposits from the spark arrester portion of the tailpipe and inside of the tailpipe housing. 1. Bolt 8