G The arrow mark on the tire must point toward the rotating direction of the wheel. G Tapered nuts are used for both the front and rear wheels. Install the nuts with their tapered side to- EBU25700 Installing a wheel 1. Install the wheel and the nuts. wards the wheel. 1. Arrow mark NOTE: 8-63 4. Insert a new bulb into the bulb holder, push it in, and then turn it clockwise until it stops. 5. Install the bulb holder (together with the bulb) by turning it clockwise. 6. Install the panel. 2. Elevate the ATV and place a suitable stand under the frame. 3. Remove the nuts from the wheel. 4. Remove the wheel. EBU25650 Removing a wheel 1. Loosen the wheel nuts. 1. Wheel nut 8