8 EBU25740 Troubleshooting Although Yamaha ATVs receive a thorough in- spection before shipment from the factory, trouble may occur during operation. Any problem in the fu- el, compression, or ignition systems, for example, can cause poor starting and loss of power. The following troubleshooting charts represent quick and easy procedures for checking these vital systems yourself. However, should your ATV re- quire any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, expe- rience, and know-how to service the ATV properly. Use only genuine Yamaha replacement parts.
Im- itation parts may look like Yamaha parts, but they are often inferior, have a shorter service life and can lead to expensive repair bills. Do not smoke when checking the fuel system. Fuel can ignite or explode, causing severe inju- ry or property damage. Make sure there are no open flames or sparks in the area, including pi- lot lights from water heaters or furnaces. WARNING EWB02280 8-64 2. Lower the ATV to the ground. 3. Tighten the wheel nuts to the specified torques. Tightening torques: Front wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf) Rear wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf) 1. Tapered nut