Yamaha YFM7FGPW — CLEANING AND STORAGE

9 Long-term Before storing your ATV for several months: 1. Follow all the instructions in the “Cleaning” section of this chapter. 2. Fill up the fuel tank and add fuel stabilizer (if available) to prevent the fuel from deteriorat- ing. Specified amount: 7.5 ml of stabilizer to each liter of fuel (or 1 oz of stabilizer to each gallon of fuel) 3. Perform the following steps to protect the cyl- inder, piston rings, etc. from corrosion. a. Remove the spark plug cap and spark plug. b. Pour a teaspoonful of engine oil into the spark plug bore. c. Install the spark plug cap onto the spark plug, and then place the spark plug on the cylinder head so that the electrodes are grounded.

(This will limit sparking during the next step.) d. Turn the engine over several times with the starter. (This will coat the cylinder wall with oil.) 9-2 Wet brakes may have reduced stopping ability, increasing the chance of an accident. Test the brakes after washing. Apply the brakes several times at slow speeds to let friction dry out the Short-term Always store your ATV in a cool, dry place and, if necessary, protect it against dust with a porous cover. G Storing the ATV in a poorly ventilated room or covering it with a tarp while it is still wet, will allow water and humidity to seep in and cause rust.

G To prevent corrosion, avoid damp cellars, stables (because of the presence of ammo- nia) and areas where strong chemicals are WARNING EBU27260 Storage CAUTION: EWB02310 linings. stored. WARNING