9-3 e. Remove the spark plug cap from the spark plug, and then install the spark plug and the spark plug cap. 4. Lubricate all control cables and the pivoting points of all levers and pedals. 5. Check and, if necessary, correct the tire air pressure, and then block up the ATV so that all of its wheels are off the ground. Alternative- ly, turn the wheels a little every month in order to prevent the tires from becoming degraded in one spot. 6. Cover the muffler outlet with a plastic bag to prevent moisture from entering it. 7. Remove the battery and fully charge it. Store it in a cool, dry place and charge it once a month.
Do not store the battery in an exces- sively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)]. For more in- formation on storing the battery, see page 8-55. Make any necessary repairs before storing the NOTE: ATV. 9