See the “Engine break-in” section on page 6-4 prior to operating the engine for the first time. 1. Turn the main switch to “ON” and the engine stop switch to “ The coolant temperature warning light and en- gine trouble warning light should come on, then go off. The EPS warning light should come on, then go off when the engine is started. If a warning light does not go off, see page 4-2 for the corresponding warning light circuit 2. Apply the brake pedal, and then shift the drive select lever into the neutral or park position. The corresponding indicator light should come on. If the indicator light does not come on, have a Yamaha dealer check the electrical circuit. CAUTION: CAUTION:
EBU19880 OPERATION ECB00150 ECB00822 check. 6-1 Read the Owner’s Manual carefully before riding the ATV. Read the Owner’s Manual carefully to become familiar with all controls in order to help pre- vent any loss of control, which could cause an accident or injury. If there is a control or func- tion you do not understand, ask your Yamaha Always make sure all control cables work smoothly before you begin riding in cold weather. If the control cables are frozen or do not work smoothly, you could be unable to control the ATV, which could lead to an acci- EBU27342 Starting the engine WARNING WARNING dent or collision. EBU19900 EWB00630 dealer. EWB00640 6 WARNING CAUTION: