RIDING DOWNHILL When riding your ATV downhill, shift your weight as far to the rear and uphill side of the ATV as pos- sible. Move back on the seat and sit with your arms straight. Engine compression will do most of the braking for you. For maximum engine compres- sion braking effect, select the low-range position and change to 4WD or 4WD-LOCK before begin- ning to descend the hill. Improper braking may cause a loss of traction. Use caution while descending a hill with loose or slippery surfaces. Braking ability and traction may be adversely affected by these surfaces. Improper braking may also cause a loss of traction. 7-17 could come off the ground. The ATV could easily tip over backwards.
Apply both the front and rear brakes gradually, or dismount the ATV immediate- ly on the uphill side. Use the proper gear and maintain a steady speed when climbing a hill. If you lose all forward speed: G Shift into the park position after you are stopped. If you begin rolling backwards: G 2WD: Never apply the rear brake while rolling backwards. Apply the front brake. G 4WD or 4WD-LOCK: Apply both front and rear brakes gradually. G When fully stopped, shift into the park posi- tion. Dismount on uphill side or to a side if pointed straight uphill. Turn the ATV around and re- mount, following the procedure described in G Keep weight uphill. G Apply the brakes. G Keep weight uphill.
the Owner’s Manual. WARNING EWB01801 7 WARNING