7 G Avoid going down a hill at an angle that would cause the ATV to lean sharply to one side. Go straight down the hill where possi- CROSSING A SLOPE Traversing a sloping surface on your ATV requires you to properly position your weight to maintain proper balance. Be sure that you have learned the basic riding skills on flat ground before attempting ble. 7-18 When this ATV is in 4WD or 4WD-LOCK, all wheels (front and rear) are interconnected by the drive train. This means that applying either the front brake or the rear brake will brake all wheels. When descending hills, using either brake lever or the brake pedal will brake the wheels on the down- hill side.
Avoid sudden application of either the front or rear brake because the wheels on the up- hill side could come off the ground. Apply both the front and rear brakes gradually. Whenever possible, ride your ATV straight down- hill. Avoid sharp angles which could allow the ATV to tip or roll over. Carefully choose your path and ride no faster than you will be able to react to ob- stacles which may appear. Always follow proper procedures for going down hills as described in this Owner’s Manu- al. Note: a special technique is required when braking as you go down a hill. G Always check the terrain carefully before you start down any hill. G Never go down a hill at high speed.
G Shift your weight backward. WARNING EWB01620