Kaiyi BR380JG-1E0 — HYDRAULIC PUMP

SEN01351-00 10 Structure, function and maintenance standard 4) When servo piston is balanced q Let us take the area receiving the pressure at the large diameter end of the piston as (A1), the area receiving the pressure at the small diameter end as (A0), and the pressure flowing into the large diameter end of the piston as (PEN). q Force of spring (4) is adjusted in such that the position of the balanced stop of this spool (6) may be determined when (PP) (PLS) = 1.7 MPa{17.75 kg/cm 2 } at the median of the speci- fied value.

q If (PSIG) [Output pressure of LS-EPC valve, 0 to 2.9 MPa {0 to 30 kg/cm 2 }] is input to port (G), the position of the balanced stop is changed in the range of (PP) (PLS) = 2.2 to 0.69 MPa {22 to 7 kg/cm 2 } in proportion to (PSIG) pres- sure. q If the main pump pressure (PP) of the LS valve and the combined force of spring (4) and LS pressure (PLS) are balanced, and the relation- ship is (A0) x (PP) = (A1) x (PEN), servo piston (12) will stop in that position. q The swash plate of the pump will be held at the intermediate position.

[Spool (6) will be stopped at a position where the distance of the opening from port (D) to port (E) and the dis- tance from port (C) to port (D) is almost the same.] q At this point, the relationship between the pres- sure receiving areas across servo piston (12) is (A0) : (A1) = 3 : 5, so the pressure applied across the piston when it is balanced becomes (PP) : (PEN) C 5 : 3. 14 BR380JG-1E0