10 Structure, function and maintenance standard SEN01351-00 3) Action for the direction of minimizing the pump delivery q When LS differential pressure ( d PLS) becomes larger (for example, when the area of opening of the control valve becomes smaller and pump pressure (PP) rises) because of the rightward move (it reduces discharge amount) of servo piston (12), pump pressure (PP) pushes spool (6) to the right. q When spool (6) moves, pump pressure (PP) flows from port (C) to port (D) and from port (K), it enters the large diameter end of the pis- ton.
q Pump pressure (PP) also enters port (J) of the small diameter end of the piston, but because of the difference in area between the large diameter end and the small diameter end on servo piston (12), it is pushed to the right. As the result, the servo piston (12) moves into the direction of reducing the swash plate angle. q As LS selector pressure (PSIG) is input to port (G), setting force of spring (4) is reduced. BR380JG-1E0 13