Kaiyi BR380JG-1E0 — GRIZZLY FEEDER SEMIAUTOMATIC SYSTEM

SEN01354-00 10 Structure, function and maintenance standard Grizzly feeder semiautomatic system 1 Function q This system receives the signal from the front pump pressure sensor installed to main pump outlet circuit (1) and inputs it to the CR710 con- troller in control box (2). If this system detects an overload on the crusher, it stops supplying material from grizzly feeder (3) to the crusher. If the front pump outlet pressure is kept above the set crusher load for 0.5 seconds, this sys- tem decreases the EPC current through the CR710 controller in control box (2) to reduce the speed of grizzly feeder (3) to the minimum.

q While this function is operating, the rotary lamp (red) (4) installed to the machine keeps lighting up. If the front pump outlet pressure is kept below the set crusher load for 0.3 seconds, the griz- zly feeder is automatically reset to the speed in accordance with the feeder speed level of the machine monitor in control box (2). Set pressure of pres- sure switch Set crusher load Crusher load 10.8 – 19.1 MPa {110 – 195 kg/cm 2 } a See “Function of setting crusher load.” 2 BR380JG-1E0