10 Structure, function and maintenance standard SEN01355-00 Password function If a password is set in advance, the engine does not start unless the password is input. When setting or changing the password, move to the set screen from the ordinary screen. This work cannot be carried out until 10 minutes pass after the starting switch is turned ON and the monitor screen changes to the ordinary screen. While the screen is waiting for an input, input the 8- digit number "19210513" with the numeral keys. After the last digit (3) is input, the screen to check valid/invalid of the password appears. 3. Depress operation switch (1) or (2) to set valid/ invalid of the password.
In the figure at right, operation switch (1) is depressed to set "valid". Setting and changing method Turn the starting switch ON. While depressing operation switch (2), depress 7, 2, 9, 7, 2, and 9 keys on the numeral key pad in order, and the screen to input an 8-digit number appears. 4. If invalid is selected and input check switch (3) is depressed, the password function becomes invalid and ordinary screen (4) appears. If valid is selected and input check switch (3) is depressed, the password function becomes valid and the screen to input a 4-digit number appears. BR380JG-1E0 51